If you read the electricity tariff schedule in Pakistan, the first protected slab looks cheap: Rs 10.54 per unit. Then the bill arrives from your distribution company, whether that is IESCO in Islamabad, LESCO in Lahore, K-Electric in Karachi or any other, and the total, divided by the units you used, is closer to Rs 40. Nothing is hidden and nothing is wrong. The advertised rate is only one line out of about nine, and the other lines are charged on top of it.
This post walks through every line, in the order they are added, using the same figures the AsalBill calculator uses. The rates below are the ones the calculator held at its last update on 25 July 2026. Rates change, so check the calculator for today's numbers.
Step one: which slab table applies to you
Pakistan runs one national residential tariff for every DISCO and for K-Electric. What decides your rate is not where you live but how much you use and how you have used it.
There are four cases:
- Lifeline: up to 50 units a month is billed at Rs 3.95 per unit, and 51 to 100 units at Rs 7.74. There is no slab benefit, so the whole month is billed at one rate, and the fixed charge does not apply.
- Protected: for consumers whose six-month average is 200 units or less. You keep the benefit of one previous slab, so the first 100 units cost Rs 10.54 and units 101 to 200 cost Rs 13.01.
- Unprotected: everyone else. There is no slab benefit at all. Every unit is billed at the rate of the highest slab you reach, which is the part that surprises people.
- Time-of-Use: a sanctioned load of 5 kW or more is billed on a different tariff entirely, with peak units at Rs 46.85 and off-peak units at Rs 34.53.
Protected status is a six-month test, not a this-month one. Cross 200 units in a single month and that month is billed as unprotected, even if you are normally well below it.
Step two: why unprotected slabs hurt
For unprotected consumers the rate steps up with consumption, and the new rate applies to all of your units, not just the extra ones:
| Units used | Rate for every unit | Fixed charge per kW |
|---|---|---|
| up to 100 | Rs 22.44 | Rs 275 |
| 101 to 200 | Rs 28.91 | Rs 300 |
| 201 to 300 | Rs 33.10 | Rs 350 |
| 301 to 400 | Rs 36.46 | Rs 400 |
| 401 to 500 | Rs 38.95 | Rs 500 |
| 501 to 600 | Rs 40.22 | Rs 675 |
| 601 to 700 | Rs 41.85 | Rs 675 |
| above 700 | Rs 47.20 | Rs 675 |
So going from 300 to 301 units does not add one unit at Rs 36.46. It re-bills all 301 units at Rs 36.46 instead of Rs 33.10. That jump is why a handful of extra units can raise a bill by hundreds of rupees.
Step three: the lines that sit on top
After the energy charge, the bill adds these:
- Fixed charges: the slab's Rs per kW multiplied by your sanctioned load.
- Fuel Price Adjustment (FPA): a per-unit adjustment for fuel costs, billed about two months late, on that earlier month's units.
- Quarterly Tariff Adjustment (QTA): applied across the three billing months of a quarter. It can be negative, and at the calculator's last update it was a credit of Rs 1.9857 per unit.
- FC surcharge: Rs 0.43 per unit as it appears on real bills.
- Electricity duty: 1.5% of the energy charge plus the FPA and QTA lines.
- GST: 18% of nearly everything above, including the duty.
- Advance income tax: 7.5% of the bill for non-filers when it reaches Rs 25,000 or more.
Notice that GST is charged on top of duty, and duty on top of the adjustments. Each layer enlarges the next one.
A worked example: 300 units, unprotected, 2 kW
Take a 300-unit month on an unprotected IESCO connection with a 2 kW load, using the rates above:
| Line | How it is worked out | Amount |
|---|---|---|
| Energy | 300 units at Rs 33.10 | Rs 9,930.00 |
| Fixed charges | Rs 350 per kW for 2 kW | Rs 700.00 |
| FPA | 0.3364 for 300 units | Rs 100.92 |
| QTA | minus 1.9857 for 300 units | minus Rs 595.71 |
| FC surcharge | 0.43 for 300 units | Rs 129.00 |
| Electricity duty | 1.5% of energy, FPA and QTA | Rs 141.53 |
| GST | 18% of the lines above | Rs 1,873.03 |
| Total | Rs 12,279 |
Divide Rs 12,279 by 300 units and the real cost is Rs 40.93 per unit. The advertised slab rate for that month was Rs 33.10, so about Rs 7.83 of every unit is fixed charges, adjustments and taxes.
What you can do with this
Two habits make the biggest difference. First, watch the 200-unit line, because crossing it in even one month moves that month from protected to unprotected rates. Second, check the FPA and QTA lines on your own bill against the current national figures, since they change every month or quarter.
You can run your own numbers in the calculator by entering your units, or fetch your latest bill to fill the form from it. For a tour of every setting, from consumer type and sanctioned load to solar savings and net metering, read the complete guide to electricity bills in Pakistan. The breakdown shows every line described here, so you can see exactly where each rupee goes.