An electricity bill in Pakistan is easy to read and hard to predict. The tariff you see quoted is one number, the bill that arrives from IESCO, LESCO, K-Electric or another company is the sum of a dozen lines, and a single extra unit can change the total by thousands of rupees. The AsalBill calculator exists to show that sum before the bill arrives, and to show every line that goes into it.
This guide covers the whole tariff and every feature of the calculator in one place. Each rule is explained once, in the section where it belongs, and the other sections point back to it. All figures are the ones the calculator held at its last update on 25 July 2026, so check the Rates panel for today's numbers. Every worked example was produced by the calculator itself, for a household with a 2 kW sanctioned load unless stated otherwise.
In this guide
- The calculator at a glance
- Electricity companies in Pakistan
- Autofill from your bill
- Lifeline, protected and unprotected consumers
- Sanctioned load and line type
- The time-of-use tariff for 5 kW and above
- FPA, QTA and the FC surcharge
- Income tax and the tax filer checkbox
- Where every rupee goes
- Your twelve-month usage history
- Solar savings for one month
- Solar savings over a whole year
- Saved connections and your privacy
- How the rates stay current
- A monthly routine that saves money
- What the calculator does not cover
The calculator at a glance
The main screen asks for two things: your Electricity company and your Units used (kWh). Beneath them is the number most people never see on a bill, the real cost of one unit after every tax and surcharge, with the estimated bill for the month underneath. For 300 units on an unprotected connection the calculator shows Rs 40.93 per unit and Rs 12,279 for the month, although the slab rate that month is only Rs 33.10. The rest of this guide explains where the other Rs 7.83 per unit comes from.
On a computer, the top bar holds the logo and the buttons History, Solar savings, Rates and Blog, plus a moon or sun button that switches between light and dark mode. On a phone the same buttons sit in a bar along the bottom of the screen. A line under the total names the category, the tariff and your company, and a slim bar shows your cost per unit whenever you scroll away from it.
Explanations that would otherwise need paragraphs sit behind small i icons. Tap one and a short note opens. Below the result, the Details section holds consumer type, load, line type, the peak-hour share (for large connections) and the tax filer checkbox. Change any field and the bill updates immediately; there is no calculate button.
Electricity companies in Pakistan
Outside Karachi your electricity comes from one of eleven distribution companies, known as DISCOs. In Karachi it comes from K-Electric. The dropdown lists all twelve with the areas they serve:
| Company | Main areas served |
|---|---|
| IESCO | Islamabad, Rawalpindi, Attock, Jhelum, Chakwal |
| LESCO | Lahore, Kasur, Sheikhupura, Okara |
| GEPCO | Gujranwala, Gujrat, Sialkot |
| FESCO | Faisalabad, Sargodha, Jhang |
| MEPCO | Multan, Bahawalpur, DG Khan, Sahiwal |
| PESCO | Peshawar, Mardan, Swat, Kohat |
| HAZECO | Abbottabad, Mansehra (Hazara) |
| TESCO | Tribal districts (the former FATA) |
| HESCO | Hyderabad, Mirpurkhas, Badin |
| SEPCO | Sukkur, Larkana, Shikarpur |
| QESCO | Quetta and Balochistan |
| K-Electric | Karachi |
One tariff for the whole country
The most surprising fact about electricity pricing in Pakistan is that there are no separate rates for each company. The regulator, NEPRA, sets a uniform national tariff, and the same slab rates, fixed charges, fuel adjustment and quarterly adjustment apply to all the DISCOs and to K-Electric. A household in Lahore using 300 units on an unprotected connection pays the same energy rate as one in Quetta using 300 units. Websites that quote a different rate per company are, in most cases, repeating the national figures under a different name.
What does differ
Three things genuinely vary, and the dropdown handles each:
- Provincial electricity duty, charged at 1.5 percent of the variable part of the bill. The calculator uses 1.5 percent for every company except TESCO and keeps the figure separate for each one in case a province changes its rate.
- Tax exemptions in the tribal districts. Most consumers in the former FATA areas served by TESCO are exempt from GST and duty. When you choose TESCO, the calculator sets both to zero and explains why in the note beside the company name. For 300 units on an unprotected 2 kW connection, the bill is Rs 12,279 with the usual 18 percent GST and 1.5 percent duty and Rs 10,264 without them, a difference of Rs 2,015 a month. If your own TESCO bill does show GST and duty, restore them in the Rates panel.
- The bill portal. Eleven companies publish duplicate bills through the same national billing portal, which makes autofill possible. K-Electric uses its own portal behind a login, so autofill is not available for Karachi. K-Electric still follows the national tariff, so typing your units gives the same kind of estimate.
Changing the company resets GST, duty and the PTV fee to that company's defaults. If you have not fetched a bill it also resets the fuel adjustment, quarterly adjustment and surcharge to the national values; a fetched bill keeps its own, because a real bill's rates are more specific.
Autofill from your bill
Typing units gives an estimate. Autofill gives you your own bill, read for you, with the calculator calibrated to it.
Which number to enter
Every Pakistani electricity bill carries two identifiers, usually at the top left: a reference number of 14 digits and a customer ID of 10 digits. The box accepts either and tells them apart by length. Companies sometimes re-issue reference numbers, so last year's number may stop working; the customer ID does not change, which makes it the better one to keep. If a lookup by reference number fails, try the customer ID.
What happens when you press Fetch
- Your browser sends the number and your chosen company to a small fetching service.
- The service asks the official PITC billing portal for your latest bill, the same public page you could open yourself.
- It reads the numeric lines and sends them back. Your name, address and meter number are not extracted and are never returned.
The form then fills in with your units, sanctioned load, consumer type, line type and that month's own fuel adjustment, quarterly adjustment and surcharge rates. Your bill also carries twelve months of usage, which unlocks the History button.
The real bill comes first
After a fetch, the result shows your actual bill line by line, and the last row of the breakdown reads Billed total. The status line also shows what the bill charged and what the calculator's own model would have estimated, so you know how far to trust the model once you start changing numbers.
The moment you edit a field, the page hands over to the model and responds to your edits. Two facts from the bill survive an edit to the units, because they do not depend on this month's consumption: the fuel adjustment amount, which was fixed by an earlier month's usage, and, for large connections, the billed demand. Edit the field each one belongs to and it is dropped.
Newer bills and failures
A bill is final once issued, so the calculator serves the saved copy until the next month's bill is due. Check for a newer bill looks sooner, and Forget this number deletes the connection from your device. When a lookup fails, the status line says why: a wrong digit, wrong company or re-issued reference number (try the customer ID), too many lookups in a minute (wait), the PITC portal being down (an outage on their side; a saved bill keeps being used), or a timeout. None of these stops the calculator working; autofill is a shortcut, never a requirement.
Please look up only connections that are yours or that you have permission to check.
Lifeline, protected and unprotected consumers
The Consumer type setting is the largest single factor in a Pakistani electricity bill. It can turn the same units into a bill several times larger. The dropdown offers Auto, Lifeline, Protected and Unprotected.
The three categories
Lifeline is for the smallest users. Up to 50 units, every unit costs Rs 3.95. For 51 to 100 units, every unit costs Rs 7.74. There is no slab benefit, so the whole month is billed at one rate, and there is no fixed charge, fuel adjustment or quarterly adjustment. Instead a minimum charge of Rs 75 (single phase) or Rs 150 (three phase) applies. Lifeline covers only up to 100 units; enter more and the calculator estimates the month as unprotected.
Protected consumers are those whose six-month average is 200 units or less. They keep the benefit of one previous slab: the first 100 units cost Rs 10.54 and units 101 to 200 cost Rs 13.01.
Unprotected consumers are everyone else, and they get no slab benefit at all. Every unit is billed at the rate of the highest slab reached.
Where the bill jumps
Because unprotected consumers re-bill every unit when they cross a boundary, a single extra unit can cost a great deal. This table shows the total bill, with all taxes and adjustments and for a tax filer, either side of each boundary:
| Category | Units | Rate for every unit | Bill | Per unit |
|---|---|---|---|---|
| Lifeline | 50 | Rs 3.95 | Rs 237 | Rs 4.73 |
| Lifeline | 51 | Rs 7.74 | Rs 473 | Rs 9.27 |
| Protected | 100 | Rs 10.54 | Rs 1,588 | Rs 15.88 |
| Protected | 101 | Rs 10.54 for 100, Rs 13.01 after | Rs 1,838 | Rs 18.19 |
| Protected | 200 | Rs 10.54 for 100, Rs 13.01 after | Rs 3,235 | Rs 16.17 |
| Unprotected | 201 | Rs 33.10 | Rs 8,499 | Rs 42.29 |
| Unprotected | 300 | Rs 33.10 | Rs 12,279 | Rs 40.93 |
| Unprotected | 301 | Rs 36.46 | Rs 13,646 | Rs 45.34 |
| Unprotected | 400 | Rs 36.46 | Rs 17,824 | Rs 44.56 |
| Unprotected | 401 | Rs 38.95 | Rs 19,298 | Rs 48.13 |
| Unprotected | 500 | Rs 38.95 | Rs 23,771 | Rs 47.54 |
| Unprotected | 501 | Rs 40.22 | Rs 24,991 | Rs 49.88 |
| Unprotected | 700 | Rs 41.85 | Rs 35,652 | Rs 50.93 |
| Unprotected | 701 | Rs 47.20 | Rs 40,192 | Rs 57.34 |
Two cliffs stand out. Going from 200 units (protected) to 201 units costs Rs 5,264 more, because the month is billed as unprotected. Going from 700 to 701 units costs Rs 4,540 more, because every unit is re-billed at Rs 47.20. This is how the tariff is written, not a calculator quirk, and it is why watching the meter near a boundary is worth real money.
It is a six-month test
Protected status depends on your six-month average, not one month. Two things follow. If you cross 200 units in a single month, that month is billed as unprotected even if your average is low. And if your six-month average is above 200, even a light month is billed as unprotected: with the same 150 units, a household averaging 150 pays about Rs 2,529, while one averaging 250 pays about Rs 5,682.
What Auto does
With Auto, over 200 units in the month the calculator uses unprotected. Otherwise, if you have fetched a bill, it checks the six months of history on the bill and applies the real rule. Without a bill it has no history, so it assumes protected and shows a small amber i saying so; if you recently crossed 200, choose Unprotected yourself. Auto never picks lifeline, so select it manually if you qualify.
Sanctioned load and line type
Two settings in Details look minor but move the bill: Load (kW) and Line type.
Sanctioned load and the fixed charge
Your sanctioned load is the power, in kilowatts, that your company has approved your connection to draw. It is fixed when the connection is approved or changed, and appears on the bill as Sanctioned Load or Connected Load. The calculator starts at 2 kW and fills it in from your bill if you use autofill.
Fixed charges are billed per kilowatt of sanctioned load, per month, at a rate set by your slab. Protected consumers pay Rs 200 per kW for up to 100 units and Rs 300 per kW for 101 to 200 units. Unprotected consumers pay between Rs 275 and Rs 675 per kW, rising with consumption. The fixed charge is the slab rate multiplied by your load, whether you use the electricity or not.
Take a protected household using 100 units. With a 1 kW load the bill is about Rs 1,352, or Rs 13.52 per unit. With a 3 kW load it is about Rs 1,824, or Rs 18.24 per unit. The units and energy charge are identical; the extra Rs 472 comes entirely from the larger load and the GST on it. A household that pays for more load than it needs pays that difference every month, and the calculator lets you test the effect in seconds.
Line type and the minimum charge
Line type chooses single or three phase, and has one effect: it sets the minimum monthly charge, Rs 75 for single phase and Rs 150 for three phase. The minimum applies only where fixed charges do not, which means lifeline. A lifeline household using 10 units has an energy charge of Rs 39.50, below the minimum, so the calculator tops it up: the bill is about Rs 83 on a single phase line and about Rs 158 on three phase. For everyone else the fixed charge already acts as the floor.
The time-of-use tariff for 5 kW and above
A sanctioned load of 5 kW or more is billed on a different tariff entirely. Enter a load of 5 or more and the calculator switches automatically: a note appears, the category line changes to Time-of-Use, and a Peak share (%) field appears. Protected and unprotected do not exist for this tariff, so a 10 kW home is not an unprotected one with a big load.
Two prices
Your meter keeps two registers. Peak units cost Rs 46.85 and off-peak units cost Rs 34.53. The energy charge is the sum of the two. Unless you fetch your bill, the calculator cannot know how your units divide, so it asks you to estimate Peak share (%), starting at 25. For a 10 kW connection using 500 units:
| Peak share | Peak units | Off-peak units | Estimated bill | Per unit |
|---|---|---|---|---|
| 10 percent | 50 | 450 | Rs 24,665 | Rs 49.33 |
| 25 percent | 125 | 375 | Rs 27,704 | Rs 55.41 |
| 50 percent | 250 | 250 | Rs 29,687 | Rs 59.37 |
At 25 percent the energy charge is 125 units at Rs 46.85 plus 375 at Rs 34.53, which is Rs 5,856.25 plus Rs 12,948.75, a total of Rs 18,805. Moving from 10 to 50 percent peak adds about Rs 2,460 to the energy charge alone, and can also push the whole bill over the income tax line (see income tax). Shifting heavy appliances to off-peak hours is where this tariff rewards you.
The fixed charge on demand
The fixed charge is Rs 675 per kW, charged on billed demand and not on sanctioned load. The calculator assumes a floor of half your sanctioned load, so a 10 kW connection is charged on 5 kW: Rs 3,375. A 5 kW connection is charged on 2.5 kW: Rs 1,687.50. That floor is inferred from one real bill and is the least certain number in the model, so when you fetch your bill the calculator uses the demand it states instead.
FPA, QTA and the FC surcharge
Beneath the slab rate sit three small per-unit lines that most people skip. They change every month or quarter, can be positive or negative, and together can move a bill by hundreds of rupees.
FPA, the fuel price adjustment, trues the tariff up for fuel costs. NEPRA announces it monthly. The May 2026 figure, applied on July bills, is plus Rs 0.3364 per unit for all companies and for K-Electric. The key detail is the delay: the adjustment on a bill relates to a month about two months earlier and is charged on that month's units. If you used 89 units then and 153 now, the FPA is the rate times 89. This is why changing this month's units does not change this month's FPA line, and why the calculator holds a fetched bill's FPA fixed when you edit units.
QTA, the quarterly tariff adjustment, is announced by NEPRA once a quarter and applied across its three billing months. It can be negative. For June to August 2026 bills the calculator holds minus Rs 1.9857 per unit, a credit. On 300 units that is about Rs 595.71 off the bill; set it to zero and the same bill rises from Rs 12,279 to Rs 12,992, a difference of Rs 713 once the extra duty and GST are counted.
The FC surcharge is Rs 0.43 per unit as it appears on real bills. A larger "debt service surcharge" figure appears in budget news, but that amount is recovered inside the tariff itself and does not show as a separate bill line, so the calculator uses the figure that actually appears.
Lifeline consumers are exempt from all three, and prepaid customers are exempt from the adjustments. None of the three is the end of the story, because duty is charged on the energy charge plus FPA and QTA, and GST on nearly everything including the duty. A rise of one rupee per unit in FPA, on 300 units, raises the bill by about Rs 359 and not Rs 300.
Income tax and the tax filer checkbox
The checkbox I'm an active tax filer has nothing to do with electricity and everything to do with the size of a large bill. When a domestic bill reaches Rs 25,000, a consumer who is not on the Federal Board of Revenue's Active Taxpayer List pays an extra 7.5 percent advance income tax on the bill, charged under section 235. Active filers do not pay it. The rule is national and applies identically to households of IESCO, MEPCO, K-Electric or any other company.
By default the box is unticked, which treats you as a non-filer. Tick it and the calculator removes the tax.
A cliff, not a gradient
The tax is charged on the whole bill, not on the part above Rs 25,000. That makes the line behave like a step:
| Units (unprotected, 2 kW) | Non-filer bill | Filer bill | Difference |
|---|---|---|---|
| 500 | Rs 23,771 | Rs 23,771 | none |
| 550 | Rs 29,326 | Rs 27,280 | Rs 2,046 |
| 600 | Rs 31,836 | Rs 29,615 | Rs 2,221 |
At 500 units the bill is under the line and filing status is irrelevant. At 550 units the bill before tax is Rs 27,280, which crosses the line, and the non-filer pays 7.5 percent of it on top. The per-unit cost jumps from Rs 47.54 at 500 units to Rs 53.32 for a non-filer at 550, but only to Rs 49.60 for a filer. Whether you are on the list is a matter of your tax record, which this calculator cannot look up; check with the FBR or your tax adviser before ticking the box.
Where every rupee goes
Under the headline figure, the Where every rupee goes section lists every line on the bill, with buttons to save it as a PDF or a JPG. For 150 units on a protected connection with a 2 kW load, the total is Rs 2,529, or Rs 16.86 per unit:
| Line | How it is worked out | Amount |
|---|---|---|
| Energy charges | 100 units at Rs 10.54 | Rs 1,054.00 |
| Energy charges | 50 units at Rs 13.01 | Rs 650.50 |
| Fixed charges | Rs 300 per kW for 2 kW | Rs 600.00 |
| Fuel price adjustment | 0.3364 for 150 units | Rs 50.46 |
| Quarterly adjustment | minus 1.9857 for 150 units | minus Rs 297.85 |
| FC surcharge | 0.43 for 150 units | Rs 64.50 |
| Electricity duty | 1.5% of variable charges | Rs 21.86 |
| GST | 18% | Rs 385.82 |
| Estimated total | Rs 2,529 |
The order matters, because later lines are calculated from earlier ones. Energy comes first, then fixed charges, then the three adjustments. Electricity duty is 1.5 percent of the energy charge plus the fuel and quarterly adjustments. GST is 18 percent of nearly everything above, including the duty, so taxes are charged on taxes. Advance income tax appears last, and only when it applies. Two rows appear only when needed: the minimum charge top-up for lifeline households, and the PTV licence fee, which defaults to zero because it no longer appears on bills.
The last row tells you which mode you are in. After a fetch, with nothing edited, the table shows your own bill and reads Billed total; the fuel-adjustment arrears, which the bill taxes separately, are combined into single duty and GST rows. After any edit it reads Estimated total. When the table shows a real bill and the model would have landed more than one percent away, a note says by how much.
Use the table as a diagnosis. If fixed charges are a large share, look at your load. If the energy line dominates, look at your category and slab. If the adjustments swing the total, look at the rates. If the tax rows are large, check your filer status.
Your twelve-month usage history
Every bill carries a small table of your last twelve months of consumption and charges. The History button turns it into a chart. It needs a fetched bill, so it works for the eleven companies that support autofill and not for K-Electric; before you have fetched a bill the sheet opens with a note explaining this.
Each bar is a month, with height equal to units used. On a computer, hovering shows the month, the units and the amount charged. An orange dashed line marks the 200-unit protected threshold, and bars above it are drawn in orange. A dark dotted line shows your six-month average, labelled with its value.
The average is the line that matters, because it decides whether you are protected (see the six-month test). Look at the last six bars. If the average is well under 200 you have headroom. If it is close, every extra unit in the coming months matters. If it is already above 200 you are billed as unprotected every month until it falls, and because the window moves one month at a time, a very high summer month stays in the average for six bills.
Solar savings for one month
The obvious way to count solar savings is units produced times the price of a unit. That is usually too low. In Pakistan's slab tariff, the units your panels make change the rate on every other unit. The Solar savings button re-bills the month as if those units had been bought from the grid, and shows the difference.
Why the saving exceeds units times a rate
Take a household that bought 350 units from the grid while its panels made another 100, all used at home. Its bill for 350 units is Rs 15,714, with every unit at Rs 36.46. Without panels it would have used 450 units, every one billed at Rs 38.95, a bill of Rs 21,512. The saving is Rs 5,798, or Rs 57.98 for every unit the panels made, even though no slab rate is above Rs 40 in this range.
The same logic can move a household across the 200-unit line, which is a bigger jump. A protected household with 150 grid units pays about Rs 2,529. Add 100 solar units and the total would have been 250, an unprotected month costing about Rs 10,370. The saving is Rs 7,841, about Rs 78.41 per solar unit, because the panels kept it protected. The note under the result says so.
Net metering and exports
Many Pakistani homes with solar are on net metering, where surplus power goes to the grid. Exported units never replaced a unit you would have bought, so they are not part of this saving; your company settles them separately at its own buy-back rate, which the calculator does not model. The sheet has two fields for this: Solar made (kWh), the units your inverter produced over the same dates as the bill, and Exported (kWh). With 100 units made and 40 exported, 60 units replaced grid power, and the saving falls to Rs 3,991. If everything was exported, there is nothing to save on that bill.
If your panels keep a bill under Rs 25,000, they also keep advance income tax away from a non-filer, and the result mentions it when it applies.
Solar savings over a whole year
The monthly view answers a narrow question. Work out the whole year, inside the Solar savings sheet, answers the wider one: what has my system saved since it went up? It bills each of twelve months twice, once as the meter read and once with that month's solar added back, and sums the gaps. Doing it month by month matters because the tariff is not linear: a month in which panels kept you protected is worth far more than one where they only trimmed a high slab.
The sheet has twelve rows with Month, From grid, Solar made and Saved. If you have fetched your bill, the grid column is already filled from the twelve months it prints. Only the solar column needs you, from your inverter's monthly or yearly view. Blank months count as zero, so a system installed halfway through the year is fine.
As a worked example, a household buying 150 units a month from the grid, with panels making a further 100 every month, saves Rs 7,841 each month: Rs 94,088 over twelve months for 1,200 solar units. If only the last six months have solar figures, the total is Rs 47,044.
Why it is an upper bound
The headline is worded "up to", for honest reasons. Exports are not subtracted, so an export-heavy net-metering home saves less than shown. Every month is re-billed with today's rates, because a bill carries no record of past adjustments. Peak share and filer status are single settings applied to all months. Months where extra units would not have raised the bill count as zero rather than negative. And the earliest months, which lack six months of history behind them, are tested against the earliest six the bill lists. These caveats sit behind the i beside the result.
Saved connections and your privacy
The calculator remembers your connections so return visits are instant, and it does so on your device. There are no accounts, sign-ups or logins, and the calculator itself runs in your browser. The only time anything about your bill leaves your device is when you choose to use autofill.
What is saved on your device
When a fetch succeeds, the app saves the connection in your browser's local storage, which is not a cookie. Each entry holds the company, the numbers that identify the connection and the figures from the bill. A bill prints both its reference number and customer ID, and shows the previous reference number when one was re-issued; all are saved, so entering any of them later recognises the connection you already fetched. The app keeps up to eight connections, dropping the oldest first, and shows a picker when you have two or more, for a family home and a shop, say. Your yearly solar figures are stored separately, tagged to the connection they belong to.
What leaves your browser
When you press Fetch, the number you typed and the company you chose go to the fetching service, which asks the PITC portal for your bill and returns the numeric lines. Name, address and meter number are not extracted or returned, and the privacy policy states no record of your reference number, bill or usage is kept. Three details are worth knowing:
- National rates. A successful lookup updates three national figures, the fuel adjustment, quarterly adjustment and surcharge, which are the same for every consumer in Pakistan. Only those three rates, the bill month and a timestamp are saved.
- An anonymous accuracy report. To tell when the calculator is wrong, the page sends six values: units, category, line type, sanctioned load, bill month, and the billed and estimated amounts. It carries no reference number, name or address and is sent once per bill. Typing units by hand sends nothing.
- Infrastructure logs. The lookup runs over a URL containing the number, and the hosting provider records request metadata for a few days. Your IP address is used momentarily to enforce a limit of twenty lookups a minute and is not stored.
Visits are counted with a cookie-free analytics service that cannot single out a visitor. To delete your data, use Forget this number for one connection, Clear these figures for solar, or clear site data in your browser for everything.
How the rates stay current
The Rates button opens the six editable fields, FPA, QTA, FC surcharge, GST, electricity duty and PTV fee, above a collapsible Rates last updated list with a source and date for every number. The list shows when everything was last verified, 25 July 2026 at the time of writing.
| Rate | What it reflects | How often it changes |
|---|---|---|
| Base slab rates and fixed charges | SRO 279(I)/2026, effective February 2026, uniform for all companies | About once a year |
| Fuel price adjustment | May 2026 adjustment, on July bills | Monthly |
| Quarterly adjustment | June to August 2026 billing months | Quarterly |
| FC surcharge | As charged on a real June 2026 bill | Rarely |
| GST | 18 percent | Rarely, by the Finance Act |
| Electricity duty | 1.5 percent, provincial | Rarely |
| PTV licence fee | Zero, no longer billed | Rarely |
| Advance income tax | 7.5 percent for non-filers on bills of Rs 25,000 or more | Yearly |
The three national adjustments update themselves. Every successful fetch derives them from that bill, and a weekly check refreshes them so a quiet week does not leave them stale. When you open the calculator it lays the latest values over its built-in defaults, labelling them "as billed on June bills (auto-updated)"; if the service cannot be reached, the defaults simply stay. The slabs, fixed charges, GST, duty and income tax rules change rarely and in public, through NEPRA notifications and the tariff guides the companies publish, and a person updates them by reading the notification, because the documents are scanned PDFs.
Any field can be edited. Typing a value switches the page from a real bill to the model, so the result responds immediately; changes last until you reload. Copy the three adjustments from your latest bill for the closest estimate, or set a rate to zero to ask what if: for example, the quarterly credit, to see what its end would cost.
A monthly routine that saves money
Putting the pieces together, a few habits follow directly from how the tariff works.
- Fetch your bill when it arrives and read the breakdown. It shows the real rates, your category and your six-month average in one go.
- Check your distance from the next boundary. The table in the consumer types section shows where each jump happens: 100, 200, 300, 400, 500, 600 and 700 units for unprotected households, and 200 for the protected line. If you are ten units short, those ten units may be the cheapest ones you will ever save.
- Watch the six-month average, not just this month. One heavy summer month shapes six bills.
- Review your sanctioned load once a year. It is a fixed charge that never goes away.
- On a large connection, move heavy use to off-peak hours, and keep an eye on the income tax line.
- If you have solar, enter your inverter figures each month, so the yearly picture builds itself.
- Check the date beside each rate before relying on a total, especially the monthly and quarterly ones.
What the calculator does not cover
The result is an estimate for a standard residential connection. It does not include arrears, instalment plans, late-payment surcharges or the settlement your company makes for units you export under net metering. Because the fuel adjustment is billed about two months late, a real bill can differ slightly from the estimate. The calculator is independent and is not affiliated with NEPRA, PITC or any distribution company; for a dispute about a specific bill, contact your own company. To see what your units should cost, open the calculator, choose your company and enter them.